Filter
Top Products
85
VQT2A80
Advanced (Recording pictures)
• The white balance bracket setting is released when the power has been turned off (including
power save mode).
• Pictures can be taken with white balance bracket regardless of the drive mode settings.
• You will only hear the shutter sound once.
• White balance bracket cannot be set when the [QUALITY] is set to [ ], [ ], or [ ].
• White balance bracket does not work when recording motion picture.
[REC] mode:
Setting the Light Sensitivity
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Press ( ).
Press ///to select the ISO sensitivity and
then press [MENU/SET] to set.
• You can also use the front dial to set.
• You can also press the shutter button halfway to set.
_ When the [ISO LIMIT SET] of [REC] mode menu (P123) is set to anything except [OFF],
it is set automatically within the value set in [ISO LIMIT SET].
It is set as following when the [ISO LIMIT SET] is set to [OFF].
• When [AUTO] is selected, ISO sensitivity is adjusted automatically depending on
brightness within a maximum setting of [ISO400].
ISO sensitivity
100 3200
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
ISO sensitivity
Settings
AUTO
_
The ISO sensitivity is automatically adjusted according to the
brightness.
_
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
100/200/400/800/1600/3200
The ISO sensitivity is fixed to various settings.
(When the [ISO INCREMENTS] in [REC] mode menu
(P123) is set to [1/3 EV], items of ISO sensitivity that can
be set will increase.)