Filter
Top Products
VQT2A80
20
Preparation
Charging the Battery
w About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BLB13E.
• Use the dedicated charger and battery.
• This unit has a function that can distinguish useable batteries. Exclusive batteries
(DMW-BLB13E) are supported by this function. (Conventional batteries not supported
by this function cannot be used)
• The battery is not charged when the camera is shipped. Charge the battery before use.
• Charge the battery with the charger indoors.
• Charge the battery in a temperature between 10 QC to 35 QC. (The battery temperature should
also be the same.)
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of these
battery packs are not adequately protected with internal protection to meet the
requirements of appropriate safety standards. There is a possibility that these
battery packs may lead to fire or explosion. Please be advised that we are not
liable for any accident or failure occurring as a result of use of a counterfeit
battery pack. To ensure that safe products are used we would recommend that a
genuine Panasonic battery pack is used.
Connect the AC cable.
• The battery cannot be charged when the DC cable is
connected to the AC adaptor.
Attach the battery with attention to the
direction of the battery.
• Charging starts when the [CHARGE] indicator lights
green.
Detach the battery after charging is
completed.
• Charging is complete when the [CHARGE] indicator
turns off.