Filter
Top Products
87
VQT2A80
Advanced (Recording pictures)
Press / to select an item.
• You can also use the front dial to select.
• When you press [DISPLAY] on the screen shown right,
explanations about each film mode are displayed. (When you
press [DISPLAY] again, the screen returns to the previous
screen.)
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
Note
• In film mode, the camera may do something equivalent to pull processing or push processing to
create a picture with particular characteristics. The shutter speed may become very slow at this
time.
• You can also set from the quick menu. (P31)
Press
/ to select a film.
Press / to select an item and / to adjust.
• You can also use the front dial to adjust.
• Registered settings are memorised even if the camera is
turned off.
Press [FILM MODE], press
/ to select an item,
and then press [MENU/SET].
Item Effect
[STANDARD] (COLOUR) This is the standard setting.
[DYNAMIC] (COLOUR) The saturation and contrast of the stored colours are increased.
[NATURE] (COLOUR) Brighter red, green and blue. Enhanced beauty of nature.
[SMOOTH] (COLOUR) The contrast is lowered for smoother and clearer colour.
[NOSTALGIC] (COLOUR) Lower saturation and contrast. Reflecting passage of time.
[VIBRANT] (COLOUR) Higher saturation and contrast than dynamic.
[STANDARD] ( ) This is the standard setting.
[DYNAMIC] ( ) The contrast is increased.
[SMOOTH] ( ) Smooths the picture without losing the skin texture.
[MY FILM 1]/[MY FILM 2] The saved setting is used.
[MULTI FILM]
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed. (Up to 3
pictures)
Adjusting each film mode to the desired setting