Filter
Top Products
VQT2A80
164
Others
Note
• Do not use any other remote shutters except DMW-RSL1 (optional).
• You cannot operate the camera with the remote shutter in the following cases.
– When the power save mode is cancelled
• Record with Creative motion picture mode when using for motion picture recording.
• The remote shutter cannot be used while the stereo microphone (DMW-MS1; optional) is in
use.
Using the External Microphone (optional)
If you use the stereo microphone (DMW-MS1; optional), you can switch to either stereo or
monaural sound recording.
It is also possible to reduce the wind noise efficiently by switching the [WIND CUT OFF/
ON] switch to [ON].
Preparations: Turn off the camera and close the built-in flash.
Attach the stereo microphone to the hot
shoe .
• Be sure to firmly secure to the stereo microphone with
the lock ring .
Firmly connect the stereo mini-plug cord to
the [MIC] socket on the camera as far as it
will go.
Turn on the camera and the stereo
microphone.
• While the external microphone is connected, [ ] is
displayed on the screen.
w About the Off/On Mode Selector Switch
Battery Check Lamp [BATTERY]
• When the Off/On Mode Selector Switch is changed from [OFF] to [MONO] or [STEREO], the
Battery Check Lamp [BATTERY] will light temporarily if there is still plenty of power in the
battery. If the Battery Check Lamp [BATTERY] does not light temporarily, replace the battery
with a new one.
[OFF]: Turn off the stereo microphone power.
[MONO]: Records sound in front of the digital
camera in monaural.
[STEREO]: Records sound in a wide area in stereo.
REMOTE
MIC