Filter
Top Products
VQT2A80
174
Others
[A FOLDER CANNOT BE CREATED]
• A folder cannot be created because there are no remaining folder numbers that can be used.
(P156)
Format the card after saving necessary data on a PC etc. (P37) If you execute
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
(P35)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
• The AV cable is connected to the camera.
Press [MENU/SET] if you want to delete this message at once.
Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P35)
• This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P155,
157)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
• The printer cannot print.
Check the printer.
[NO BATTERY POWER REMAINS]
• The remaining battery power is low.
Charge the battery.
[THIS BATTERY CANNOT BE USED]
• The battery cannot be recognised by the camera.
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Centre.
• The battery cannot be recognised as its terminal is dirty.
Remove any dirt etc. from the terminal.
[PLEASE MAKE SURE TO TURN ON THE POWER OF EXTERNAL MICROPHONE.]
• When attaching the stereo microphone (DMW-MS1; optional), check the battery status and
make sure the power is on before use. (P164)