Filter
Top Products
89
VQT2A80
Advanced (Recording pictures)
• When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [ ] even if it is set to [ ].)
• Multi film indication ([ ]) displayed on the LCD monitor/Viewfinder will flash until all
pictures of preset amount are taken.
Note
• [STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
• White balance bracket will be disabled when the multi film bracket is set.
• Multi film bracket does not work while recording motion pictures.
[REC] mode: ±´
Taking pictures by specifying the aperture/
shutter speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
Set the mode dial to [ ].
Rotate the front dial to set the aperture
value.
• It will switch between aperture setting operation and
exposure compensation operation every time the
front dial is pressed.
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
Set the mode dial to [ ].
Rotate the front dial to set the shutter
speed.
• It will switch between shutter speed setting operation
and exposure compensation operation every time the
front dial is pressed.
Take a picture.
[ ] Aperture-priority AE
[ ] Shutter-priority AE