Filter
Top Products
VQT2A80
58
Basic
w Switching the displayed image while maintaining the playback zoom
You can switch the displayed image while maintaining the same zoom magnification and
zoom position for the playback zoom.
Switch to picture select operation by pressing
the front dial during playback zoom, and select
pictures with /.
• It will switch between picture select operation and move
zoom position operation every time the front dial is pressed
during playback zoom.
Note
• You can also delete the recording information etc. on the LCD monitor/Viewfinder during
playback zoom by pressing [DISPLAY].
• If you want to save the enlarged picture, use the trimming function. (P141)
• The playback zoom may not operate if pictures have been recorded with other equipment.
• The zoom magnification and the zoom position are cancelled when the camera is turned off
(including power save mode).
• The zoom position returns to the centre in the following images.
– Images with different aspect ratios
– Images with different numbers of recorded pixels
– Images with a different rotation direction (when [ROTATE DISP.] is set to [ON])
• Playback zoom cannot be used during motion picture playback or pictures with audio playback.
Deleting Pictures
Once deleted, pictures cannot be recovered.
Press [(].
To delete a single picture
Select the picture to be deleted, and then
press [‚].
[(] button
[DISPLAY] button
[
‚] button
Press to select [YES] and then press
[MENU/SET].
MENU
/SET