Filter
Top Products
151
VQT2A80
Connecting to other equipment
_ The shape of the remote control varies depending on the region. Operate following the TV
guide displayed on screen.
w Usable functions
Operate with the remote control for the TV.
1) Multi playback
Press [Red] on the TV remote control to switch the type
of data for playback.
• The type of data for playback changes in the order of [ALL]
[ ] [ ] [ ] [ALL].
Select the picture with /// and press [OK] for one
screen display.
• You can set the slide show etc. when you press [OPTION].
2) One screen display
Select the image with /.
Recording information is displayed with .
You can return to multi playback (1) with .
•
Slideshow (3) will start if [OK] is pressed when using one screen display from [ALL] or [ ].
• Playback of the motion picture will start when you press [OK] when one screen display
is performed from [ ] or [ ]. Use / for forward/back and to stop playback.
Operation icons
3) Slide show
Press [OK] to start/pause the slide show.
Select the image with / in the pause mode.
The screen will be returned to one screen display (2) by pressing to finish
the slide show.
• Playing audio in the slideshow
If [ALL] is selected when playing motion picture audio in the slideshow, press [OPTION], set
[EFFECT] to Off and [AUDIO] to On in the slideshow to play audio in the slideshow.
• Turning control icon display on and off
Operation icons can be hidden when you press [EXIT]. Also, operation icons will be displayed
when you press [OPTION] while the operation icons are hidden.
Note
• It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2
or more HDMI input terminals on the TV.
• When the
[VIERA Link] (P36) of this unit is set to [ON], operation using the button on this unit
will be limited.
• VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV
for how to set etc.)
• If you are not using VIERA Link, set
[VIERA Link] (P36) to [OFF].
Panasonic TV compatible with VIERA Link
[OPTION] button
[EXIT] button
[OK] button