Filter
Top Products
VQT2A80
128
Advanced (Recording pictures)
About [ ] and [ ]
[ ] will adjust the focus automatically when the jitter of the camera gets small. [ ] will
adjust the focus at all times (continuous AF operation).
The camera will adjust the focus automatically, and the focus adjustment when the shutter
button is pressed becomes faster. It is effective when you do not want to miss the photo
opportunity.
Note
• The battery will be consumed faster than usual.
• Press the shutter button halfway again when it is difficult to focus on the subject.
• When [PRE AF] is set to [ ], it may take time to focus on the subject if you rotate the zoom
ring from Wide to Tele or suddenly change the subject from a distant one to a nearby one.
• [PRE AF] does not work during the preview mode.
• [PRE AF] function does not work with lenses without the AF function. Also, [ ] can only be
used when a compatible lens (P14) is used.
• Refer to P78 for details.
[PREVIEW HOLD]
This will set the operation of the [ ] button when displaying the
preview screen.
[OFF]: Preview screen is displayed only when the [ ] is
pressed.
It will return to previous screen when [ ] is released.
[ON]: Preview screen is displayed even after the [ ] is
released after pressing. (P92)
It will return to previous screen when [ ] is pressed
again.
[PRE AF]
Depending on the setting, camera will adjust the focus
automatically before pressing the shutter button halfway.
[OFF]
[ ]: Quick AF
[ ]: Continuous AF
[DIRECT AF AREA]
Position and size of the AF area can be modified easily during
recording.
[OFF]
[ON]: AF area can be moved freely with /// when
[Ø] is selected.
[FOCUS PRIORITY]
It will set so no picture can be taken when it is out of focus.
[OFF]: This gives priority to the best time to take a picture so
you can take a picture when the shutter button is
pressed fully.
[ON]: You cannot take a picture until the subject is brought
into focus.