Filter
Top Products
VQT2A80
34
Preparation
• Adjust the brightness of the screen with /, contrast and saturation
with /or the front dial.
• When [DISPLAY] is pressed in screen shown right, it will switch to the
colour adjustment screen. Adjust between red and green with /, or
between orange and blue with / or the front dial.
• It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when the viewfinder is in use.
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear differently from actuality on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or
another object to block the light.
• The number of recordable pictures decreases in Auto power LCD and Power LCD modes.
• [AUTO POWER LCD] cannot be selected when playing back pictures.
• [AUTO POWER LCD] is disabled during motion picture recording.
• When you connect the camera to a TV, the volume of the TV speakers does not change.
[MONITOR]/
[VIEWFINDER]
Brightness, colour, or red or blue tint of the LCD monitor/
viewfinder is adjusted.
[LCD MODE]
These menu settings make it easier to see the LCD monitor when
you are in bright places.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
… [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
} [SCENE MENU]
Set the screen that is displayed when the mode dial is set to ,
, , , and .
[OFF]: The recording screen in the currently selected
advanced scene mode (P93) or scene mode (P97)
appears.
[AUTO]: The advanced scene mode or scene mode menu
screen appears.
[BEEP]
Set the focus confirmation beep, the self-timer beep and the
alarm beep.
[s] (Muted)
[t] (Low)
[u] (High)
u [VOLUME]
Adjust the volume of the speaker to any of 7 levels.
LCD