Filter
Top Products
VQT2A80
156
Connecting to other equipment
Using a drag-and-drop operation, move the pictures you want to
acquire or the folder storing those pictures to any different folder on
the PC.
w Disconnecting the USB connection cable safely
• Proceed with the hardware removal using “Safely Remove Hardware” on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
• Turn the camera off before connecting or disconnecting the AC adaptor (P24).
• Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
• HDMI connection is disabled and connection with the USB connection cable will take priority
when you connect the USB connection cable while the HDMI mini cable is connected (P149).
w Viewing the contents of the card using the PC (folder composition)
• Folders and images processed in the PC cannot be played back on the camera. It is
recommended to use the “PHOTOfunSTUDIO 3.1 HD Edition” bundled software on the
CD-ROM (supplied) when you write the image from PC to a card.
A new folder is created when pictures are taken in the following situations.
• After [NO.RESET] (P35) in the [SETUP] menu has been executed
• When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
• When there is a picture with file number 999 inside the folder
w Connection in the PTP mode (Windows
XP, Windows Vista
and Mac OS X only)
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.
• [AVCHD] motion picture cannot be played back in PTP mode.
Folder number
Colour space P: sRGB
_: AdobeRGB
File number
JPG: Pictures
MOV: Motion pictures
RW2: Pictures in RAW files
MISC: DPOF print
Favourite
AVCHD: [AVCHD] Motion pictures