Filter
Top Products
53
VQT2A80
Basic
In programme AE mode, you can change the preset
aperture value and shutter speed without changing the
exposure. This is called programme shift.
You can make the background more blurred by
decreasing the aperture value or record a moving subject
more dynamically by slowing the shutter speed when
taking a picture in programme AE mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2 While the values are displayed (about 10 seconds), perform the programme
shift by rotating the front dial.
• It will switch between programme shift operation and exposure compensation operation (P70)
every time the front dial is pressed while the values are displayed.
• The programme shift indication
appears on the screen when programme shift is activated.
• To cancel programme shift, turn the camera off or rotate the front dial until the programme shift
indication disappears.
w Example of programme shift
(When 14–140 mm/F4.0–5.8 lens included in DMC-GH1K is used)
Note
• How the exposure compensation is switched can be changed by [EXPO. SETTINGS] (P129) in
the [CUSTOM MENU] menu.
• If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turn red and blink.
• Programme shift is cancelled and the camera returns to normal programme AE mode if more
than 10 seconds pass after programme shift is activated. However, the programme shift setting
is memorised.
• Depending on the brightness of the subject, programme shift may not be activated.
• Programme shift is not possible when the [SENSITIVITY] is set to [ ].
Programme shift
(A): Aperture value
(B): Shutter speed
Programme shift amount
Programme shift line chart
Programme shift limit
(A)
(B)
4 2 1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
1
/
4000
15
16
17
18
19
20
(Ev)
2
2.8
4
5.6
8
11
16
22
1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14