Filter
Top Products
131
Recording
[Wireless Setup]
•
Press the [AF/AE Lock] button to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
¢ Not available when [Wireless FP] is set to [ON].
Item Description of settings
[Built-in]
¢
[Firing Mode]
[TTL]: The camera automatically sets the output of the built-in
flash.
[OFF]: The built-in flash fires only a signal-flash.
[Flash Adjust.]
The output of the built-in flash is set manually.
[A Group]/
[B Group]/
[C Group]
[Firing Mode]
[TTL]: The camera automatically sets the output of the external
flash.
[AUTO]
¢
: Flash output is set by the external flash.
[MANUAL]: Set the luminosity ratio of the external flash manually.
[OFF]: The external flashes in the specified group will not fire.
[Flash Adjust.]
Set the output of the external flash manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/128] in steps of [1/3].
B
C
A