Filter
Top Products
68
Basic
Taking a Still picture
• Set the drive mode dial to [ ] (single).
1
Select the Recording Mode. (P84)
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not
achieved, except when set to flash.)
• When the image is correctly focused, the picture
will be taken, since the [Focus/Release Priority]
(P55) is set initially to [FOCUS].
¢1 When AF Mode is set to [ ], the first AF area at which focus is achieved may be
displayed momentarily while pressing halfway.
¢2 A beep will be emitted when focus is first achieved during the pressing halfway.
• When the brightness is insufficient for [AFF] or [AFC], the camera will operate as if
[AFS] has been set. In this case, the display will change to the yellow [AFS].
3
Press the shutter button fully (push it in
further), and take the picture.
Focus Mode AFS
Focus
When the subject is
focused
When the subject is not
focused
Focus indication C On Blinks
AF area D Green —
Sound Beeps 2 times —
Focus Mode AFF/AFC
Focus
When the subject is
focused
When the subject is not
focused
Focus indication C On Blinks or Off
AF area D
Green
¢1
—
Sound
Beeps 2 times
¢2
—
6060602.82.82.8
AB
D
C