Filter
Top Products
222
Wi-Fi
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
Since the camera gives priority to recording, sending may take longer during the recording
of Burst pictures or motion pictures.
•
Motion pictures cannot be sent.
• If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will
not be resent.
• You may not be able to delete files or use the playback menu while sending.
• When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then
press [MENU/SET].
•
When connecting with the setting you used before, you
can select the connection destination from [Select a
destination from History] (P214) or [Select a destination
from Favorite] (P215).
3
Press
3
/
4
to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [Smartphone], and then press [MENU/SET].
5 Select the connection method. (P223)
6 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P224)
7 Take pictures.
•
The pictures are sent automatically after taking them.
• To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to smartphone/tablet
Preparations:
•
Install the “LUMIX LINK” in advance. (P211)
ョㄏヒ
ヸㄊノョㄊ