Filter
Top Products
276
Others
[Editing operation cannot proceed as information processing is ongoing.]
When a card with pictures deleted or file names changed using a PC or other device is
inserted into this unit, it will automatically retrieve new information and reconstruct the
group pictures. The currently retrieving information icon [ ] may be displayed in the
playback screen for long period of time when there are many image files, and deletion or
[Playback] menu cannot be used during this time.
•
If this unit is turned off while acquiring information, only the pictures that have already
acquired the information are saved as a group. When you switch on again, the information
retrieval will restart from the same point.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.
[Failed to connect wireless access point]/[Connection failed]/[No destination found]
• Check following regarding the wireless access point.
> The wireless access point information set on this unit is wrong. Check the authentication
type, encryption type, and encryption key. (P218)
> Power of the wireless access point is not turned on.
> Setting of the wireless access point is not supported by this unit.
• Check the network setting of the destination.
• Radio waves from other devices may block the connection to a wireless access point. Check
other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.
[No picture to send]
•
This is displayed when there is no image to transmit due to the restriction of the destination.
Check the file type of the image to transmit. (P208)
[Connection failed. Please retry in a few minutes.]/[Network disconnected. Transfer
stopped.]
•
Radio waves from the wireless access point are getting weak. Perform the connection closer
to the wireless access point.
• There is no reply from the server or it has exceeded the communication processing time. Try
again after a while.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.