Filter
Top Products
227
Wi-Fi
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then
press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P214) or [Select a destination from
Favorite] (P215).
3
Press
3
/
4
to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [Cloud Sync. Service], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET]. (P217)
6 Check the send setting.
•
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.]. (P224)
7 Take pictures.
•
To change the setting or disconnect, press [Wi-Fi]. (P221)
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB” (P239) and configure the Cloud Sync. setting to
send a picture to a Cloud Folder.
∫ About the images sent to a Cloud Folder by the use of [Cloud Sync. Service]
(As of October 2012)
To send images to a PC, Cloud Sync. setting is required. Configure the settings on a PC
with “PHOTOfunSTUDIO” or on a smartphone/tablet with “LUMIX LINK”.
•
If you set the picture destination to [Cloud Sync. Service], sent pictures are temporarily saved
in the cloud folder, and they can be synchronized with the device in use, such as the PC or
smartphone/tablet.
• A Cloud Folder stores transferred images for 30 days (up to 1000 pictures). Transferred
images are deleted automatically 30 days after the transfer. Furthermore, when the number of
stored images exceeds 1000, some images may be deleted depending on the [Cloud Limit]
(P224) setting even within 30 days after the transfer.
• When the download of images from a Cloud Folder to all specified devices is complete,
images may be deleted from the Cloud Folder even within 30 days after the transfer.
ョㄏヒ
ヸㄊノョㄊ