Filter
Top Products
267
Others
Using the stereo shotgun microphone (DMW-MS2:optional), you can switch between the
gun (ultra-directional) recording and the wide range stereo recording.
Preparations:
•
Close the built-in flash, and then turn this unit off.
• Remove the hot shoe cover that is attached to the camera. (P265)
1 Attach the dedicated stereo shotgun microphone to this unit, and then turn this
unit on.
2 Select [Special Mic.] on the [Motion Picture] menu. (P37)
•
The menu items are displayed only when the stereo shotgun microphone is connected.
3 Press 3/4 to select the Item and then press [MENU/SET].
•
While the external microphone is connected, [ ] is displayed on the screen.
• When the external microphone is connected, [Mic Level Disp.] (P190) is automatically set to
[ON], and the mic level is displayed on the screen.
• When attaching the stereo shotgun microphone, do not hold only the stereo shotgun
microphone because it may detach from the camera.
• [Wind Cut] in the [Motion Picture] can reduce the wind noise effectively.
• Do not open the built-in flash when the stereo shotgun microphone is attached.
• If the noises are recorded when you use an AC adaptor (optional), use a battery.
• Read the operating instructions of the stereo shotgun microphone for details.
External Microphone (optional)
[STEREO]: Allows stereo recording of sound over a wide area.
[SHOTGUN]: Allows recording from one direction by shutting out background and
surrounding noise.