Filter
Top Products
275
Others
[Memory Card Error]/[Memory card parameter error]/[This memory card cannot be used]
> Use a card compatible with this unit. (P31)
• SD Memory Card (8 MB to 2 GB)
• SDHC Memory Card (4 GB to 32 GB)
• SDXC Memory Card (48 GB, 64 GB)
[Insert SD card again]/[Try another card]
•
An error has occurred accessing the card.
> Insert the card again.
> Insert a different card.
[Read Error/Write Error
Please check the card]
•
It has failed to read or write data.
> Remove the card after turning this unit off. Insert the card again, turn this unit on, and try
to read or write the data again.
• The card may be broken.
> Insert a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc. (P52)
> Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the
card]
•
Use a card with SD Speed Class with “Class 4” or more for [AVCHD]/[MP4] motion picture
recording, and use “Class 10” for [MOV].
• If recording stops even by using a card of the above specified SD Speed Class, the data
writing speed is decreasing. We recommend you make a backup, and then format (P52).
• Depending on the type of the card, motion picture recording may stop in the middle.
[A folder cannot be created]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
> Format the card after saving necessary data on a PC etc. (P52) If you execute [No.Reset]
in the [Setup] menu after formatting, the folder number is reset to 100. (P51)
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P49)
• This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P257,
260)