Filter
Top Products
133
Recording
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
1
Press [ ].
2
Rotate the rear dial to compensate the exposure.
A Exposure Compensation value
B Flash Adjust
• You can switch the functions between the rear dial and the
front dial by pressing [DISP.].
• The Exposure Compensation value can be set within a range
of j5 EV to i5 EV. When recording motion pictures, the Exposure Compensation
value can be set within a range of j3 EV to i3EV.
• Select [n0] to return to the original exposure.
3
Rotate the front dial to adjust the flash output.
• Only available when [Auto Exposure Comp.] (P128) in [Flash] in the [Rec] menu is set
to [ON], and [Firing Mode] (P129) in [Flash] is set to [TTL] or [WIRELESS].
• Flash brightness can also be adjusted using [Flash Adjust.] in [Flash] in the [Rec] Menu.
(P128)
4
Press [ ] to set.
• You can also press the shutter button halfway to set.
• When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the
built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation. (P128)
• When the exposure value is out of the j3EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of
the recorded image in the Auto Review or playback screen.
• The set exposure value is memorized even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
+1+1
+1+1 +2+2 +3+3 +4+4 +5+5
-
5
-
5
-
4
-
4
-
3
-
3
-
2
-
2
-
1
-
100
0
A B