Filter
Top Products
165
Recording
Applicable modes:
You can shoot up to four exposures per image.
1 Select [Start] and then press [MENU/SET].
2 Decide on the composition, and take the first picture.
•
After taking the picture, press the shutter button halfway down to
take the next picture.
• Press 3/4 to select the item and then press [MENU/SET] for
one of the following operations.
3 Shooting the second, third, and fourth exposures.
•
If [MENU/SET] is pressed while taking pictures, the photographed images are recorded,
and the multiple exposure picture-taking session will be completed.
4 Press 4 to select [Exit] and then press [MENU/SET].
•
You can also press the shutter button halfway to finish.
∫ About Automatic Gain Control setting
Select [Auto Gain] on the screen shown in step
1 and set it.
∫ Combining RAW images in the card
On the screen shown in step
1, set [Overlay] to [ON]. After [Start], Images in the card will
be displayed. Select the RAW images, press [MENU/SET], and continue recording.
•
[Overlay] is available only for RAW images taken with this unit.
• Image is not recorded until completion.
• The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
• Items shown in gray on the menu screen cannot be set during multiple exposures.
• This operation is not available when using [Time Lapse Shot].
[Multi Exp.]
[Next]: Advance to the next picture.
[Retake]: Return to the first picture.
[Exit]: Record the image of the first picture, and finish
the multiple exposure picture-taking session.
[ON]: The brightness level is adjusted according to the number of pictures taken and the
pictures are superimposed over each other.
[OFF]: Compensate the exposure to match the subject so that all the superimposed
exposure effects will be just right.
([LW
5HWDNH
1H[W
([LW
5HWDNH