Filter
Top Products
46
Preparation
• The number of days that have passed since the departure date can be printed out using the
“PHOTOfunSTUDIO” bundled software on the CD-ROM (supplied).
• The travel date is calculated using the date in the clock setting and the departure date you set.
If you set [World Time] to the travel destination, the travel date is calculated using the date in
the clock setting and the travel destination setting.
• The travel date setting is memorized even if the camera is turned off.
• The [Travel Date] feature is disabled when recording [AVCHD] motion pictures.
• While recording motion pictures, the [Location] feature is disabled.
• Refer to P210, 244 for details.
• The [E-Shutter Vol] only works when [SH] for Burst Mode or [Electronic Shutter] is set to [ON].
[Travel Date]
Departure date and return date of the trip as well as the name of
the travel destination can be set.
You can display the number of days that have passed when
playing back the pictures and stamp it on the recorded pictures
with [Text Stamp] (P197).
[Travel Setup]:
[SET]: Departure date and return date are set. Elapsed
days (how many days after) of the trip are recorded.
[OFF]
• The travel date is automatically canceled if the current date is
after the return date. If the [Travel Setup] is set to [OFF],
[Location] will also be set to [OFF].
[Location]:
[SET]: Travel destination is recorded at the time of
recording.
[OFF]
•
For details on how to enter characters, refer to
“
Entering Text
”
on P64.
• A maximum of 30 characters can be entered.
• Up to 15 characters can be entered for [ ], [ ], [ ], [ ] and [ ].
[Wi-Fi]
[Wi-Fi Function]/[Wi-Fi Setup]
[Beep]
Set the volume for electronic noises and the electronic shutter noise.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
[E-Shutter Vol]:
[ ] (High)
[] (Low)
[] (OFF)