Filter
Top Products
139
6. Focus and Brightness (Exposure) Settings
Focus and exposure can be adjusted to a specified subject. Focus and exposure will keep
on following the subject even if it moves. (Dynamic tracking)
∫ When operating buttons
Place the subject in the AF tracking frame, and press the
shutter button halfway to lock the subject.
A AF tracking frame
• AF area will turn green when the camera detects the subject.
• The AF area turns yellow when the shutter button is released.
• Lock is canceled when [MENU/SET] is pressed.
∫ When operating the touch screen
You can lock the subject by touching it.
•
Perform the operation after canceling the touch shutter function.
• The AF area turns yellow while the subject is locked.
• Lock is canceled when [ ] is touched.
• Exposure is adjusted in accordance with the locked subject when [Metering Mode] is set to
[ ]. (P161)
• If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
• When AF tracking fails, [Ø] is set.
Not available in these cases:
•
[ ] cannot be used with [Time Lapse Shot].
• In the following cases, [ ] operates as [Ø].
– [Glistening Water]/[Glittering Illuminations]/[Soft Image of a Flower]/[Monochrome] (Scene
Guide Mode)
– [Sepia]/[Monochrome]/[Dynamic Monochrome]/[Rough Monochrome]/[Silky Monochrome]/
[Soft Focus]/[Star Filter]/[Sunshine] (Creative Control Mode)
– [Monochrome] ([Photo Style])
• Dynamic Tracking function may not work in the following cases:
– When the subject is too small
– When the recording location is too dark or bright
– When the subject is moving too fast
– When the background has the same or similar color to the subject
– When jitter is occurring
– When zoom is operated
Setting up [ ] ([AF Tracking])
A