Filter
Top Products
49
2. Preparations before Recording
• Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
• To turn the monitor on again, press any button or touch the monitor.
• When [Live View Mode] is set to [ECO] the image quality on the recording screen may be
worse than when it is set to [NORMAL], but this does not affect the recorded image.
• When [Live View Mode] is set to [NORMAL], the usage time is reduced.
• [Economy] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– [Multi Exp.]
– [Time Lapse Shot]
• When using the AC adaptor (optional), [Sleep Mode] is disabled.
• When using the AC adaptor (optional), [Auto Monitor Off] is fixed to [5MIN.].
• When using the AC adaptor (optional), [Live View Mode] is fixed to [NORMAL].
[Economy]
The unit can be set up to prevent unnecessary battery
consumption.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto Monitor Off]:
The monitor is automatically turned off if the camera has not been
used for the time selected on the setting.
[5MIN.]/[2MIN.]/[1MIN.]
[Live View Mode]:
Sets the monitor to display in such a way that power consumption
is reduced.
[NORMAL]/[ECO]
[USB Mode]
Select the USB communication system when connecting the
camera to your PC or your printer with the USB connection cable
(supplied).
y [Select on connection]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set when connecting to a printer supporting PictBridge.
z [PC]:
Set when connecting to a PC.