Filter
Top Products
331
14. Others
• Is the flash closed?
> Open the flash. (P200)
• When the electronic shutter is used, the flash is not activated. (P165)
> Set [Shutter Type] to [AUTO] or [EFC].
• When [Silent Mode] is set to [ON], the flash is not activated. (P184)
> Set [Silent Mode] to [OFF].
• The flash is activated 2 times.
The interval between the first and second flash is longer when Red-Eye Reduction (P203) is
set so the subject should not move until the second flash is activated.
• Check [Monitor Luminance] setting. (P48)
• Perform [Monitor Display]. (P47)
• This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
• This may occur more often when a bright lens, such as the interchangeable lens (H-H020A), is
used for recording in brightly lit outdoor environments.
• This is not a malfunction.
These pixels do not affect the recorded pictures.
• In dark places, noise may appear to maintain the brightness of the monitor.
Flash
The flash is not activated.
The flash is activated 2 times.
Monitor
The Monitor is too bright or dark.
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
Black, red, blue and green dots appear on the Monitor.
Noise appears on the monitor.