Filter
Top Products
330
14. Others
• With recording in a quiet environment, depending on the lenses used, the sound of aperture
and focus actions may be recorded in motion pictures.
Focus operation can be set to [OFF] in [Continuous AF] (P213).
• Use of [Silent Operation] is recommended if you are concerned about operational sounds.
(P117)
• While recording motion pictures, plugging the aperture of the microphone with a finger may
reduce the level of audio recording or audio may not record at all. Also be careful because the
operation sound of lenses can easily be recorded at this time.
• Depending on the lens used, picture may be warped slightly or you may see colors along the
edge depending on the zoom factor, due to the characteristics of the lens. Also, the peripherals
of the image might look warped because the perspective is enhanced when the wide angle is
used. This is not a malfunction.
• The Optical Image Stabilizer function of the interchangeable lens (H-FS12032) only works
correctly with supported cameras.
> When older Panasonic digital cameras (DMC-GF1/DMC-GH1/DMC-G1) are used,
[Stabilizer] in the [Rec] menu (P191) cannot be set to [OFF].
It is recommended to update the firmware of the digital camera at the following website.
http://panasonic.jp/support/global/cs/dsc/download/
> When using this lens with another make of digital cameras, the Optical Image Stabilizer
function will not work.
(As of October 2013)
For details, contact the respective company.
• Manual Focus with the lens is possible only with the interchangeable lens (H-FS12032).
Refer to the support website below for details:
http://panasonic.jp/support/global/cs/dsc/
In motion pictures, abnormal clicking and buzzing sounds are recorded.
The recorded sound is very quiet.
Lens
Recorded image may be warped, or nonexistent color is surrounding the
subject.
When the lens is attached to another digital camera, stabilizer function cannot be
turned off or stabilizer function does not work.
When the lens is attached to another digital camera, manual focus operation
cannot be performed.