Panasonic DMC-GM1 Digital Camera User Manual


 
305
14.
Others
Optional accessories
Attaching a hand grip (optional: DMW-HGR1) will improve your grip on the camera.
For details, refer to the operating instructions of the hand grip.
By connecting the AC adaptor (optional), and then plugging them into an electrical socket,
you can connect this unit to a PC or printer and use without worrying about the capacity of
the battery.
To use the AC adaptor, a DC coupler (optional) is required.
Always use a genuine Panasonic AC adaptor (optional).
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
Also read the operating instructions for the AC adaptor and DC coupler.
The MC protector is a transparent filter which affects neither the colors nor the amount of
light, so it can always be used to protect the camera’s lens.
The ND filter reduces the amount of light to approximately 1/8th (equal to adjusting the
aperture value 3 increments) without affecting the color balance.
PL filter will suppress the reflected light from a metal or non spherical surfaces (flat
non-metallic surfaces, water vapour or invisible particles in the air), making it possible to
take a picture with enhanced contrast.
Do not attach multiple filters at the same time.
You can attach the lens cap or the lens hood when the filter is attached.
If you have difficulty attaching or removing the PL filter on the interchangeable lens (H-H020A),
we recommend that you attach or remove the filter with the camera power turned on and the
Focus Mode set to [MF].
Refer to the instructions for each filter for details.
Hand grip (optional)
AC adaptor (optional)/DC coupler (optional)
Filters (optional)