Filter
Top Products
153
6. Focus and Brightness (Exposure) Settings
Using the [Custom] menu, you can make advanced MF Assist settings.
Setting the display method of the MF Assist (enlarged screen)
•
Available settings vary depending on the lens used.
Changing the display of the MF Assist
Making the desired changes to MF Assist settings
[MENU] > [Custom] > [MF Assist]
When an interchangeable lens with no focus ring (H-FS12032) is used
[ON]
Focus can be adjusted when 2( ) is pressed and the MF area setting screen is
displayed.
[OFF]
Focus can be adjusted when 2( ) is pressed. The MF area setting screen will not
be displayed.
When an interchangeable lens having a focus ring (H-H020A) is used
[]
MF Assist is displayed when the focus ring of the lens is rotated or 2() is
pressed.
[]MF Assist is displayed when the focus ring of the lens is rotated.
[]MF Assist is displayed when 2( ) is pressed.
[OFF] MF Assist is not displayed even when the focus ring of the lens is rotated.
[MENU] > [Custom] > [MF Assist Display]
[FULL]: Enlarges the display in a window on the screen.
[PIP]: Enlarges the display in full screen.
•
The display of the assist screen can also be switched by touching [ ] on the focus
adjustment screen.
• When the control dial is rotated, the display can be enlarged/reduced up to approximately 3 to
6 times in [PIP]. In
[FULL]
, it can be enlarged/reduced up to approximately 3 to 10 times. The
display is enlarged/reduced by a factor of 1.
• The display can also be enlarged/reduced by pinching out/pinching in.