Filter
Top Products
148
6. Focus and Brightness (Exposure) Settings
∫ Displaying the MF Assist
•
It can be displayed by rotating the focus ring, pinching out (P15) the screen, or touching the
screen twice. (In [Miniature Effect] of Creative Control Mode, it cannot be displayed by touching
the screen)
• It can also be displayed by pressing 2 of the cursor button to display the MF area setup
screen, using the cursor button to decide the MF area position, and then pressing [MENU/
SET].
∫ Closing the MF Assist
•
It will close when the shutter button is pressed halfway.
• You can also close MF Assist by pressing [MENU/SET] or touching [Exit].
• It will also close when the screen is touched twice.
• When displayed by rotating the focus ring, it is closed approximately 10 seconds after
operations are stopped.
• MF Assist or MF guide may not display depending on the lens used, but you can display MF
Assist by direct operation of the camera, using the touch screen or a button.
Not available in these cases:
•
The MF Assist is disabled when using the Digital Zoom or recording motion pictures.
When using an interchangeable lens (H-H020A) with
a focus ring
1 Set the focus mode lever to [MF].
2 Rotate the focus ring to focus.
Rotate to A side:
Focuses on nearby subject
Rotate to B side:
Focuses on faraway subject
E MF Assist (enlarged screen)
F MF Guide
G Peaking
• When using an interchangeable lens with a focus
lever, move the focus lever to focus.
A
B
AF
+
F
G
E