Filter
Top Products
207
9. Stabilizer, Zoom and Flash
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1 Select the menu. (P37)
2 Press 3/4 to select [Flash Adjust.] and then press [MENU/SET].
3 Press 2/1 to set the flash output and then press [MENU/SET].
•
You can adjust from [j2 EV] to [i2 EV] in steps of 1/3 EV.
• Select [n0] to return to the original flash output.
• [i] or [j] is displayed on the flash icon in the screen when the flash level is adjusted.
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
•
For details on Exposure Compensation, refer to P157.
Applicable modes:
When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performed
whenever the flash is used. The camera automatically detects red-eye and corrects the
picture.
Settings: [ON]/[OFF]
•
[ ] is displayed on the icon when it is set to [ON].
Not available in these cases:
•
Under certain circumstances, red-eye cannot be corrected.
Adjust the flash output
[MENU] > [Rec] > [Flash]
Synchronizing the output of the built-in flash to the Exposure
Compensation
Correcting red eyes
[MENU] > [Rec] > [Red-Eye Removal]