42
About the Battery Pack
Attaching Battery Pack to DVD Video Camera
1 Fit the battery pack to the battery attachment platform
on this DVD Video Camera and slide it upward until
a click is heard.
Note:
• Make sure that the battery pack is in the correct
orientation.
• Make sure that the battery pack is securely attached:
Incomplete attachment could cause the battery pack to
fall, resulting in damage.
Removing Battery Pack
After using the DVD Video Camera, remove the battery pack from it.
1 Slide the BATTERY EJECT switch on the bottom of
DVD Video Camera: The battery pack can be
removed.
2 Slide the battery pack downward to remove it.
Note:
• For safety, be sure to turn the DVD Video Camera off
before attaching or removing the battery pack.
• Be careful not to drop the removed battery pack.
• If the battery remains attached, minute level current will
flow even if the DVD Video Camera is off, and the battery
pack will discharge.
Terminal
must
face up.
1
2