Filter
Top Products
90
123
Setting OSD Output On or Off (On-Screen Display)
If you connect this DVD Video Camera to a TV to view images on TV screen, you can switch off the on-screen
information (displayed in the viewfinder or on the LCD screen) from the TV screen.
1 Press the MENU button,
choose “OSD output” on the
“Record Functions Setup”
menu screen, and then press
the A button.
2 Choose “On” or “Off”, and
press the A button.
3 Press the MENU button to end setting.
Note:
• The “OSD Output” setting will return to “On” whenever
the DVD Video Camera is turned off.
• Even if “Off” is chosen, the on-screen information will
appear during playback. See page 63 for playback on-
screen information display.
• Even after the on-screen information is removed from the
TV screen, it will still appear in the viewfinder or on the
LCD screen.
• The on-screen display output functions only when the
“Input Source” setting is set to “CAMERA”: It cannot be
set during “LINE” or “S LINE” (VDR-M70PP only).
• “OSD Output” is displayed only when “Input Source” is set
to “CAMERA”.
Record Funct ions Setup
On
Off
RAM
VIDEO Mode
Input Source
ENTER RETURN
OSD Output
30MIN
0:00:00
REM
FINE
8:00AM
SEP
30
2004
LCD screen or viewfinder
“On” setting
“Off” setting
TV screen TV screen
30MIN
0:00:00
REM
FINE
8:00AM
SEP
30
2004