Filter
Top Products
46
Inserting and Removing Disc
Inserting Disc
1 Press down the DISC EJECT lever once and release
it.
A few moments after the ACCESS/PC indicator
blinks, the cover of disc insertion compartment will
open slightly.
2 Gently open the cover by hand until it stops.
3 Insert the disc, in Round DVD Holder, into the disc
guide until it stops.
Note that the recording/playback surface of disc must
face the inside of DVD Video Camera. The
orientation for inserting the disc into the disc guide is
also specific: load the disc correctly, referring to the
figure below.
•
The disc exposed portion must face in the same
direction as the lens, as shown in figure.
• The recording/playback side must face the inside of
DVD Video Camera.
4 Push the section marked “PUSH CLOSE” on the
cover of disc insertion compartment, to close the
cover.
5 Turn the DVD Video Camera on ( or ).
When “DISC ACCESS” disappears, the DVD Video
Camera is ready for recording.
lIdentifying recording/playback
sides of disc:
Single sided disc:
The recording/playback side is
opposite to the printed label.
Double-sided disc:
The recording/playback side of
“SIDE A” is opposite to the
“SIDE A” marked side.
The recording/playback side of
“SIDE B” is the “SIDE A”
marked side.
Disc cover
DISC EJECT
lever
PUSH CLOSE
portion
Disc guide
Correct
orientation
Incorrect orientation
“SIDE A” mark
The opposite side is
the “SIDE A”
recording/playback
side.