Filter
Top Products
15
2.5 Attach and remove lens
1. Remove the front body cap, just like you would remove a lens, by
pushing the lens release button backward and then turn the front body
cap or the lens itself counter clockwise and lift out.
2. Align the white alignment dot of the lens [A](on the shiny ange) with
the camera’s white dot[B], t the lens into the camera and rotate it
clockwise until it clicks into place.
To remove the front lens cap, squeeze the shiny sections together
and lift out.
To remove rear lens cap turn it counterclockwise.
Removing
While sliding the lens release button back, rotate the lens counter
clockwise until it stops and lift it off.
After removing the lens from the camera body, protect both ends by
attaching the caps.
Oil, dust, ngerprints or water on the electronic contacts could result
in malfunction or corrosion. Wipe such impurities off with a clean piece
of cloth.
Do not touch the distance ring or other rotating parts when attaching
the lens. - When installing a lens, do not press the lens release button.
MF
80mm
1:28
AF
22
22
1
1
1
1
4
4
ft
m
A
B
A