Filter
Top Products
32
3.5 Using focus lock and infrared focusing
Using the Focus Lock Function
If the object that you want to focus on is not in the focus frame, the
camera focuses on the background at the center. In such cases use the
focus lock function to lock the focus before releasing the shutter.
1. Set the focus mode selector lever to “S” or “C.”
Put the subject in the focus frame and halfpress the shutter release button.
2. Lock the focus.
When the focus mark in the viewnder LCD is lit, press the AF lock
button on the front of the camera to lock the focus.
3. Adjust the composition.
With the shutter release button half-pressed, slide the camera to achieve
the desired composition, and release the shutter.
When the focus mode is set at “S” (single focus mode) and the focus mark
is lit, hold the shutter release button halfway down to lock the focus.
NOTE
Assignment of the AEL and AFL buttons can be swapped.
Custom settings C-15.
- You can set the camera so that when the AFL button is pressed, AF is
activated and AF lock is performed Custom settings C-19.
m