Filter
Top Products
50
4.7 Front/rear dial lock mechanisms
When the Electronic Dial Lock is “On,” all currently set values in “Av”
(Aperture Priority AE), “Tv” (Shutter Priority AE) and “M” (Manual mode)
cannot be adjusted with the front or rear dials. This prevents accidental
change of shutter speed or aperture values.
Press down both the multiple exposure mode button and the auto
bracketing mode button for approximately one second, until the “On”
indicator blinks.
To release the mode, hold down the same buttons until “OF” blinks.
3. “L” is displayed on the main LCD to indicate that operation of the
front and rear dials is blocked.
When the dial lock is ON, the shutter speed and aperture will not change
even if you turn the front or rear dial.
When you activate the electronic dial lock, and if you then operate the
electronic dial, the dial lock indicator “L” on the main panel blinks for
three seconds to show that the electronic dial lock is functioning.
Av
Tv
M
X
P
CF
SET
AEL
NOTICE:
The setting will be stored after one
second.
Dial lock can not be set when the
exposure mode is “P” (program AE).
Even while dial lock is set, the front
dial or rear dial can still be used to
perform the various settings. (Dial
lock is temporarily released.)
Av
Tv
M
X
P
CF
SET
AEL