Phase One 645 AF Digital Camera User Manual


 
29
Focus Areas
You can select the focus area that best suits the kind of pictures you intend to
take. The selected focus area can be checked on the external LCD panel.
Normal focus area
Position the subject within frame in the focus fame in the viewnder.
If there are multiple objects in the focus frame located at various
distances, the camera will focus the nearest object.
Spot focus area
The camera focuses at the center of the mark in the focus frame [O] in
the viewnder.
Manual Focus Mode (M)
The auto focus function can be cancelled, and you can focus manually.
1. Switch to “M” (manual focus mode).
Turn the focus mode selector lever and set it to “M” (manual focus
mode). [MF]Appears on the top LCD panel.
2. Manual Focus Operation for Telephoto and Zoom lenses.
All Mamiya 645 AF Telephoto and Zoom lenses can be switched from
Auto Focus to Manual Focus by sliding the focusing ring on the lens
FORWARD until it clicks. When this is done, the “Auto Focus” inscription
on the lens barrel is covered and the lens can then be focused manually.
When the FOCUSING RING is set in this position the external LCD
display on the top of the camera will show. It is not necessary to set the
FOCUS MODE SELECTOR on the body to “M”. To switch back to auto
focus, simply slide the focusing ring BACK towards the camera and the
“Auto Focus” inscription on top of the lens will again be visible. This
method applies to Mamiya 645 AF Telephoto and Zoom lens only.
3. Adjust the focus.
Turn the lens focusing ring until the subject is in focus. When it is in
focus, the focusmark lights on the viewnder LCD.
Notice:
You can select whether or not to display
the focus mark and the out of focus
direction mark. Custom settings C-18.
Focus point selection mark
Left AF area
Right AF area
Center AF area
X
M
Tv
Av
P
22
25
2.25
0.7
0.8
ft
m
11
4
4
CF
A