Filter
Top Products
37
Manual Mode (M)
This mode is used to set both the aperture and shutter speed for total
exposure control. Shutter speeds can be selected from B (bulb), 30
seconds to 1/4000 of a second. Aperture values can be set from the
open to the minimum aperture. B (bulb) can also be specied in this
mode.
1. Hold down the button and turn the exposure mode setting dial to “M”
(Manual) position.
2. Turn the rear dial to set the desired aperture.
3. Turn the front dial to set the desired shutter speed.
4. When the shutter release button is halfpressed, the difference
between the present settings and the metered value is displayed in the
viewnder’s LCD panel. The value is displayed in 1/3 stop increments
within a range of ±6 EV.
CF
M
X
Tv
Av
P
SET
AEL
A
NOTICE:
When the exposure is compensated
in the Manual mode, the difference
between the metered value and the
compensated value will be displayed
on the viewfinder LCD. In the B
(Bulb) mode, the difference with the
metered value is not displayed.
Increment of the aperture and shutter
speed value can be set at either 1/3
or 1/2-stop. Custom settings C-01.
The assignments of the front and
rear dials can be swapped. Custom
settings C-11.
Rotation direction of the dials to
change the values can be altered.
Custom settings C-13.
The selected aperture and shutter
speed can be locked.
CF
M
X
Tv
Av
P
SET
AEL
Notice:
When the set value matches with
the metered value, the difference
indicator will show “0.0”. When the
difference between the set value
and the metered value is greater
than ±6EV and the set value is lower
the metered value, the indicator
in the viewfinder LCD shows “– u
–.” Contrarily when the set value is
higher than the metered value, the
indicator shows “– o –.”