Filter
Top Products
68
6.6 Menu Mode
Pressing the lower left button sets the P+ back in “Menu mode”
Entering Menu mode by pressing the lower left button allows you to set
up all the preferences of the P+ back.
Menus are navigated by following the Enter, Exit, Up and Down arrows
and pressing the corresponding buttons on the P+ back.
Whenever you want to exit to the main screen hold down the exit button
(upper left button) for more than two seconds, and you will be back at
the main screen.
When entering the menu mode you have three options: Capture Setup,
Play Setup and Conguration.
Capture Setup
Capture Setup is where you setup preferences for the capture.
Enter the Capture Setup by pressing the enter button (lower left button)
In the Capture Setup you can select ISO, WB, FileFormat or Shutter.
By scrolling down with the down button you can select the options.
Shutter
Shutter refers to the shutter of the camera the P+ back resides on.
Due to the sleeping architecture of the P+ back, where the CCD is put
to sleep to reduce power consumption, the P+ back needs to wake up
before shooting. The timing of this wake up signal is referred to as the
latency.