Filter
Top Products
62
6.3 Navigating the Back menu
When the P+ back is turned on, the screen will always be in its home
display position or “Main screen”.
Pressing and holding down the upper left button on the back will also
bring you to the Main screen, regardless of where you are in the menu
system.
The Main screen has an indicator in the top showing remaining captures,
and a battery indicator at the bottom showing the remaining battery
capacity.
When either indicator reaches zero, it will start blinking, to indicate that
either storage or battery needs replacement before capturing any more
images.
The main screen also shows the current ISO setting, white balance
setting and IIQ Raw le format selected.
Menu buttons
The Phase One P+ back has four menu buttons to control the menu
system on the display.
When the P+ back is in its initial state (just after power up) or at the
menu systems “home” position (Main screen), the four buttons each
has a shortcut assigned. Play, Menu, ISO and WB.
Inside the menu system arrows will indicate the function of the four
buttons, the two buttons to the left are used to enter and exit the
selected menus. The two buttons to the right are used to go up and
down in the menu system.
•
•