Filter
Top Products
30
Manual focusing
1. Switch to “M” (manual focus mode).
Turn the focus mode selector lever and set it to “M” (manual focus
mode). Appears on the external LCD panel.
2. Manual Focus Operation for Telephoto and Zoom lenses.
All Mamiya 645 AF Telephoto and Zoom lenses can be switched from
Auto Focus to Manual Focus by sliding the focusing ring on the lens
FORWARD until it clicks. When this is done, the “Auto Focus” inscription
on the lens barrel is covered and the lens can then be focused manually.
When the FOCUSING RING is set in this position the external LCD
display on the top of the camera will show. It is not necessary to set the
FOCUS MODE SELECTOR on the body to “M”. To switch back to auto
focus, simply slide the focusing ring BACK towards the camera and the
“Auto Focus” inscription on top of the lens will again be visible.
This method applies to Mamiya 645 AF Telephoto and Zoom lens only.
3. Adjust the focus.
Turn the lens focusing ring A until the subject is in focus. When your
motive is in focus the focus mark lights in the viewnder LCD.
- When a lens with the focus mode selector is attached and the focus
mode selector lever of the camera body is set at “S” or “C”, you can
change focus modes between automatic and manual with the selector
of the lens.
- To use the auto focus function, both the camera body and the lens
have to be set in the auto focus mode.
- When either the camera body or the lens is set in the manual focus
mode, auto focus does not function.
- See the instruction manual for each lens for the way to switch focus
modes on the lens.