Filter
Top Products
18
2.8 The buttons
The back is equipped with four buttons, these buttons will take you
through all functions of the back, and the buttons will change function
to match the menu shown on the display. Read more on the menus in
the chapter regarding this.
2.9 LED lights
When the camera is powered up you will see a short blink in the green
and red LED’s in the right hand side of the display and you will hear a
ready beep. The lights will turn off immediately. This is an indication
that the camera is ready to capture.
Green: When capturing an image the green LED is blinking rapidly to
indicates that the P+ back is busy.
Steady green light indicates that the backlight of the display is dimmed
but the camera is still ready to shoot.
(The time before this happens can be set in the P+ back and is described
later under “Menu mode”)
RED: If the red LED is on this indicates that the P+ back is writing to the
storage media thereof the buffer is not emptied.
The red LED indicator located just beside the CF-cardslot under the
cover in the left side is assigned to only indicate CF card activity.
When the red CF-slot LED is on do not remove the card from the card
slot! This can damage the formatting of the card, resulting images or
data might be lost or corrupted.
•
•