Filter
Top Products
31
Manual focusing using the focus mark (Focus conrmation method)
With this camera, the focus mark lights in the viewnder’s LCD when
the picture is in focus. With the shutter release button half-pressed,
turn the lens focusing ring to focus on the subject. When the subject is
in focus, the focus mark lights in the viewnder’s LCD.
If is lit in the viewnder’s LCD, the camera is focused on a point behind the
object. If is lit, the camera is focused on a point in front of the object.
- Use the focus mark when taking photos in manual focus mode or
using the M645 manual lens.
- If you adjust focus using the focus mark with an M645 lens, make
sure to open the aperture. You can use this function with a lens of f/5.6
aperture or higher.
- You can set the camera so that only the focus mark is displayed.
Custom settings C-18
When Auto Focus is Failed
The auto focus function requires contrast on subject. Auto focusing may
fail to achieve focus with certain subjects described below. In such cases,
either switch to the manual focus mode and focus manually or focus an
object at the same distance as the object you want to photograph, lock
the focus using the focus lock mechanism, then take a picture.
• Low-contrast subject (blue skies, white walls and other objects)
• Two or more objects overlapping at different distances within the
focus frame (animals in cages, etc.)
• Subjects with continuous repeated patterns (building exteriors, blinds, etc.)
• Extremely backlit reective subjects (car bodies, water surfaces, etc.)
• Or when the subject is far smaller than the focus frame
in focus
turn focus ring clockwise
turn focus ring counter clockwise