Phase One 645 AF Digital Camera User Manual


 
19
2.10 Setting diopter
Look through the viewnder and make sure that the focus frame
(Rectangle with Circle) is in sharp focus. If it is not, turn the diopter
adjustment dial in the “–” direction if you are nearsighted, in the “+”
direction if you are farsighted. If this is not sufcient you may require an
optional diopter correction lens. See below.
Point the camera at a bright, plain object such as a white wall when
making this adjustment.
Replacing the Diopter Correction Lens
If there is dirt or dust on the lens surface, remove it with a blower or
sweep it off gently with a lens brush.
If there are ngerprints or dirt on the lens surface, wipe them off with a
piece of clean, soft gauze.
Using solvents could discolor the diopter correction lens frame.
1. Remove the lens supplied with the nder by pulling it downward.
2. Push the replacement diopter correction lens upward into the
viewnder’s eyepiece frame until it clicks into place.
2.11 Adjusting the Strap
Put the neck strap through the mounts and secure it to the buckle
as illustrated.
After attaching the strap, pull it and make sure it does not loosen at
the buckle.
Diopter not matching
Diopter matching