Phase One 645 AF Digital Camera User Manual


 
86
8.0 Lenses and Multi Mount
Phase One provides the widest range of possibilities, when it comes
to lenses, this increases the possible creative solutions for the
photographer, This chapter is looking closer at some possible lenses,
but it is worth noticing that there are more lenses usable than what we
show here. The enthusiastic user can nd loads of information on the
internet as well as mount-adaptors, like the Phase One Multi-Mount.
Phase One will of course always recommend our products, but we are
well aware that creativity will only grow co-operation and by using the
free market and free choices that follows the market.
Please note, errors or damage caused by thirds party products is not
covered by the warranty, test new product with curious caution.
8.1 Functions of the Phase One lens
The Phase One 80mm f.2,8 - a sharp, new and well tested digital
photography prepared lens. The lens is mounted by aligning the white
dot on the lens right in front of the white dot on the camerabody,
carefully mount the lens by turning it clockwise, until a clicksound is
heard, if you feel resistance or if you hear a grate-like sound stop and
retry – NEVER use force when mounting the lens, it should always slide
in without resistance.
The lens has 2 rings, the inner ring provides the possibility of changing
the focus mode without changing grip of the body, keep the focus
selector on the camera body on either “S” or “C” to decide whether
focusing single or continuously, and decide whether to do autofocus or
manual focus on the inner ring of the lens.
The focus ring is the outer ring on the lens, use this ring to manually
set the focus, read more on focusing in the chapter 3.4 regarding
autofocus.
Notice:
If you select MF on the camera body,
you might have to turn the camera off
before the autofocus will start.