Filter
Top Products
82
C-09 Cancel auto bracket
This function is used to set the release method of the auto bracketing
shooting setting upon completion of auto bracketing shooting.
0: Released by turning the power OFF (initial setting)
1: Until released
2: Released after one shot
C-10 Manual mode bracketing
This function is used to set whether bracketing is to be performed
using the shutter speed or f-number during M (manual) mode auto
bracketing shooting.
0: Shutter speed (initial setting)
1: F-number
C-11 Front/Rear dial function exchange in manual mode
This function is used to change over the operations of the front and
rear dials in the M (manual mode).
0: Front dial: shutter speed, rear dial: f-number (initial setting)
1: Front dial: f-number, rear dial: shutter speed
C-12 Rear function dial enabled/disabled
In the initial setting, exposure compensation can be provided by the
sub (rear) dial in P, Tv and Av modes. This function is used to set
whether to allocate the operations of the front dial to the rear dial.
0: No (exposure compensation: initial setting)
1: Yes
C-13 Dial function direction
This function is used to determine the direction in which the electronic
dial is to be rotated to increase and decrease shutter speed, the f-
number, and exposure compensation.
0: No switching (CCW: decrease,
CW: increase: initial setting)
1: Switched (CCW: increase, CW: decrease)
C-14 Program shift
This function is used to set the type of program shift. Under the initial
setting, the shifting is performed along the program line. Av enables
aperture priority shift within the possible metering range; Tv enables
shutter speed-priority shift.
0: Program shift (initial setting)
1: F-number shift
2: Shutter speed shift
C-15 AEL & AFL function button exchange
This function is used to set whether to change over the functions of the
front and rear AEL and AFL buttons.
0: No (front: AFL, rear: AEL: initial setting)
1: Yes (front AEL, rear: AFL)
C-16 Half-press shutter release function mode
This function is used to set the AE lock and AF operations when the
shutter button is half-pressed.
0: AF operation (initial setting)
1: AF operation/AE lock
C-17 AEL function lock/unlock mode
This function is used to set the method of operating the AEL button
to lock AE. At the initial setting, when the AEL button is pressed, AE
is locked; pressing the button again releases the AE lock. At the “1”
setting (released after one shot), after AE lock is set, it is released when
the shutter is tripped. At the “2” setting, AE lock is set while the shutter
button is being pressed.
0: Continuous: initial setting
1: Released after one shot
2: While the shutter button is pressed
C-18 Focus indicator selection
This function is used to set whether the defocusing mark is to be
displayed.
0: Yes (initial setting)
1: No (focusing mark only)