Filter
Top Products
81
7.2 Types of custom functions
C-00 Custom functions No.
0: [Initial setting]
1: A
2: B
3: C
When “0” has been selected and set, none of the custom items can
be set. “1,” “2” or “3” must be selected and set without fail.
C-01 Steps of aperture, shutter speed, exposure compensation.
This function is used to set the shutter speed, f-number and exposure
compensation value step width.
0: 0.3 (1/3EV step: initial setting)
1: 0.5 (1/2EV step)
2: 1.0 (1EV step)
C-02 Data imprinting
This function is used to set whether to imprint the shooting data on
the lm.
0: No imprinting (initial setting)
1: Yes (data, index)
2: Yes (date, index)
C-03 Aperture setting after lens change
This function is used to set the f-number display method for the
previously used lens when the lenses have been changed over. The
initial setting is “Yes,” in which case the f-number of the lens prior to
the changeover is displayed.
0: Yes (previous f-number: initial setting)
1: Aperture open
2: Minimum aperture setting
3: Number of stops from open
C-04 Metered value display time
This function is used to set the time it should take for sleep mode to be
established after the camera’s power is turned on. The initial setting is 15
seconds.5, 10, 15, 20, 25, 30, 40, 50, 60 or “on” can be selected and set.
Note that the batteries will discharge when “on” (no sleep mode) has
been set.
C-05 Range of exposure compensation
This function is used to set the maximum extent of exposure
compensation. Its setting takes effect in AE shooting modes (P, Tv and
Av).
0: ±3EV (initial setting)
1: ±5EV
C-06 External LCD backlight
This function is used to set the method for lighting the backlight of the
external LCD panel.
0: Set using Backlight button (initial setting)
1: Always on (metering retention period)
C-07 Select battery
This function is used to set the batteries used in the camera so that
the remaining battery charge will be displayed correctly on the external
LCD panel.
0: Primary batteries (alkaline/manganese batteries, lithium batteries:
initial setting)
1: Secondary batteries (nickel-metal hydride batteries, nickel-cadmium
batteries)
C-08 Bracketing order
This function is used to set the shooting sequence for auto bracketing.
The initial setting is “n-u-o” (normal/under/over). The shooting sequence
for 2-frame bracketing is set in auto bracketing setting mode.
0: n-u-o (normal/under/over: initial setting)
1: n-o-u (normal/over/under)
2: u-n-o (under/normal/over)
3: o-n-u (over/normal/under)