Filter
Top Products
72
The P+ back will beep, conrming that the custom white balance is now
uploaded, will be applied when the P+ back has been disconnected.
This technique is useful because you can bring up to three predened
custom white balances taken in the studio to your location shoot.
Please be aware that when shooting tethered to the computer, the white
balance must still be set in the Capture One application. White balance
cannot be set on the P+ back while tethered.
Play Setup
The second option in the menu mode is Play Setup.
Inside “Play Setup” you can select between “Backlight”, “Auto Preview”,
“Delete options” and “Brightness”.
Backlight
“Backlight” allow you to setup how many seconds or minutes of
inactivity there may be before the light of the display fades.
This setting affects the battery life of the P+ back. The more time before
light is dimmed, the faster the battery is drained.
Auto Preview
The second option in “Play Setup” is “Auto Preview”. “Auto Preview”
refers to the time the image is remains on the screen after capture.
If Auto Preview is set to “Off” the preview will not be shown automatically
when a capture is taken.
Notice
- If a button is touched during the
auto preview period, the preview will
remain on and the time-out will be
disabled until next capture.