Filter
Top Products
D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\050C03.fm
Master: Left
DPP-FP85/FP95 3-285-420-12 (1)
16
GB
Notes
• Insert only the memory card that you want to use
for printing. When multiple memory cards are
inserted, the memory card inserted first will have
the first priority.
• The printer supports both standard and small sizes.
A Memory Stick Duo adaptor is not necessary.
• The SD Card/xD-Picture Card slot automatically
detects card type.
• To use a memory card, follow the steps described
on pages 80 to 82.
This section explains how to display the images
of a memory card or an external device on the
printer’s LCD screen and print the selected
images (direct printing). For how to print from
an external device, see page 46.
1 Press 1 (on/standby) to turn on the
printer.
The standby indicator of the printer lights
in yellow green. An image stored on the
memory card or external device is
displayed on the LCD screen.
2 Press g/G to display the image that
you want to print.
3 Set the print quantity.
To print one sheet of the displayed image,
skip this procedure and go on to the next
step.
Press ENTER to display the print quantity
indication. Then press f/F to specify the
number of copies and press ENTER.
4 Press PRINT.
While the PRINT button lights in green,
the printer is ready for printing. All the
images with print quantity settings are
printed.
To print multiple images
Repeat steps 2 and 3.
To change the print quantity
Display the image whose print quantity
you want to change, and press ENTER to
display the print quantity indication. Then
press f/F to set the print quantity and
then press ENTER.
If you select “0,” printing is canceled.
Enlarging an image to be
printed (Trimming Print)
Press (Enlarge). You can enlarge an image
up to the 5 times the original scale.
Press PRINT, so that the print preview is
displayed. Press PRINT again to print the
image preview view.
To resume the original size, press (Reduce).
Notes
• Never move or turn off the printer while it is
printing; the ink ribbon may become stuck or paper
jam may occur. In case you turn off the power,
keep the paper tray inserted and turn on the printer.
After the paper is ejected, resume printing.
• Do not remove the paper tray during printing.
Otherwise, malfunction may occur.
• The print paper emerges a few times during
printing. Do not touch nor pull the emerged paper.
• If print paper is jammed, see page 77.
Printing selected images