Filter
Top Products
D:\Printer\DPPFP85.95 series\IM\3285420121DPPFP85.95IM_GB\3285420121\3285420121DPPFP8595IM_GB\110ADD.fm
Master: Right
DPP-FP85/FP95 3-285-420-12 (1)
81
GB
Additional information
*6
The printer does not support 8 bit parallel data
transfer.
Notes on use
• For the latest information on the “Memory
Stick” types that the printer supports, see the
“Memory Stick” compatibility information
on the Sony web site:
http://www.memorystick.com/en/support/
support.html
(Select the area where you use your printer,
and then select “Digital Printer” from each
area page.)
• Do not insert more than one “Memory Stick”
at the same time, which may cause trouble
with the printer.
• If you insert a “Memory Stick Micro” into
the printer without an M2 adaptor, you may
be unable to remove the “Memory Stick
Micro”.
• If you insert the “Memory Stick Micro” into
an M2 adaptor, and insert the M2 adaptor
into a Memory Stick Duo adaptor, the printer
may not operate properly.
• When you format a “Memory Stick,” use the
format function of the printer or your digital
camera. If you format a “Memory Stick”
with your computer, images may not be
displayed properly.
• When you format a “Memory Stick,” all the
data including the protected image files will
be erased. To avoid erasing important data
by accident, make sure to check the contents
of the “Memory Stick” before formatting.
• You cannot record, edit or delete data if you
slide the write-protect switch to LOCK.
• Do not attach any other material than the
supplied label on the labelling position.
When you attach the supplied label, be sure
to attach it to the labelling position. Be
careful that the label does not stick out.
The SD Card slot of the printer allows you to
use the following:
•SD card
*1
• miniSD card, microSD card
(An adaptor is necessary.)
*2
• SDHC memory card
*3
• MMC standard memory card
*4
We do not guarantee proper operations for all
types of SD cards and MMC standard memory
cards.
*1
The printer has been demonstrated as operable
with an SD Card with a capacity of 2 GB or
smaller.
*2
Some commercially available card adaptors have
projected terminals on the rear. This type of
adaptor may not work properly with the printer.
*3
The printer has been demonstrated as operable
with an SDHC card with a capacity of 8 GB or
less.
*4
The printer has been demonstrated as operable
with an MMC standard memory card with a
capacity of 2 GB or less.
Connector Write-protect switch
Place the label here.
SD Card
LOCK LOCK
Write
enable
position
Write
protect
position
Terminals
Continued